Foma N902iX, Manual

Page: 100 / 574

98
Push-to-Tal
k
Wha
t is Pus
h-
to
-T
alk?
What is Push-to-Talk?
Press the Push-to-Talk (hereinafter referred to as PTT) key (
P
) to open the PushTalk phonebook.
You can talk with one or more parties (up to five people including yourself) simply by selecting the
parties and then pressing
P
. The PushTalk charge will apply each time you press
P
. The speaker
can keep speaking while pressing and holding
P
, and the other members only listen while he/she is
speaking.
The screen displays the status of the members, e.g. who is speaking now.
d
This feature is useful when you want to contact group members or relay a short message.
d The compatible models are 902i, 902iS series, S, SH902iSL, P702i, P702iD, and SH702iS.
d
PushTalkPlus
PushTalkPlus allows a call among up to 20 people including yourself, using the pre-registered network
phonebook. This service makes the Push-to-Talk more useful, e.g. you can check the status of
members. The PushTalkPlus requires a separate subscription.
d For more details about how to use the PushTalkPlus, etc., see the guide you receive at the time of subscription.
d
Guide to the PushTalk talking screen
1
Current speaker’s name
*1
(“Myself” appears when you are speaking, or “?” when the
speaker is unknown.)
2
Group name specified at the time of dialing
(It is left blank if a group is not specified)
3
Participants’ names (excluding yourself)
*1
4
Status of members
*2
Calling: Calling the party.
Connected: The party is participating.
Disconnected: There is no response from the party, or the
party hung up. Otherwise, the party’s terminal is out of
range or turned off.
Driving: The party’s terminal is in Public mode (Driving mode).
5
Number of participants (excluding yourself)
6
Time elapsed after starting the PTT call
*1
：
If the caller sets “Caller ID setting” (p.106) or “Set Caller ID” (p.104) to “ON”, the names stored in the
phonebook appear. If the participant is not stored in the phonebook, the phone number appears. If the caller
sets “Caller ID setting” or “Set Caller ID” to “OFF”, “User unset” appears on the receivers.
*2 ： “Calling”, “Driving” and “Disconnected” appear only if three or more people are talking.
NOTE
e
If the caller sets “Caller ID setting” (p.106) or “Set Caller ID” (p.104) to “ON” and then makes a PTT call, the participants’ phone
numbers are notified to all the other participants. Since phone numbers are important information, be careful when disclosing them.
Hello
Caller Receiver
I’m coming soon
Caller
Make
a call
Receiver
Receiver
Receiver
Receiver
One-to-one
communication One-to-many
communication
Press and hold
P
to speak
Press and hold
P
to speak
４０ｓ
ＰｕｓｈＴａｌｋ ｔａｌｋｉｎｇ
ＨａｒｕｋｏＫｅｉｔａｉ
ＪｉｒｏＤｏｃｏｍｏ
ＳｈｉｒｏＤｏｃｏｍｏ
ＨａｎａｋｏＫｅｉｔａｉ
Ｊｏｉｎｅｄ ｎｕｍｂｅｒ １／４
ＨａｒｕｋｏＫｅｉｔａｉ
Ｓｋｉ ｆｅｌｌｏｗｓ
Ｓｐｅａｋｅｒ
②
③
⑤
④
⑥
①