Foma N902iX, Manual

Page: 138 / 574

136
Tone/Display/Lighting Settings
<Ma
nne
r mod
e se
t>
MENU
2
0
2
Press
o
(Finish) after changing the settings
■
When Manner mode is set
The table below lists the settings for each type of Manner mode:
*1 ： If the microphone sensitivity during calls is set to “Up”, the volume of voice heard by the other party is increased even
when you speak quietly during a call. However, the “Normal” microphone sensitivity is used for shooting movies in
“Camera” mode.
*2
：
Sounds at the “Level 2” volume when “Step” is set.
*3 ： Reads out at the “Level 2” volume when “Silent” or “Step” is set. However, even if “Read out received mail” in “Read out
setting” is set to “ON”, reading mail is not performed. Select “Read out message” from the function menu on the received
mail detail screen to perform reading out.
*4 ： Sounds at the “Level 4” volume when “Step” is set.
Item
Manner
mode
Super
silent
Original (the Original manner mode
settings are shown)
Record Message activation OFF “Record msg.” settings
Vibrator ON “Vibrator” settings
Ring tone volume for voice/
videophone calls, Push-to-Talk calls
and 64K data communication Silent “Phone vol.” settings
Ring tone volume for mail, chat mail,
packet communication and
MessageR/MessageF Silent “Mail vol.” settings
Alarm volume for the alarm clock
(including the snooze function) Silent “Alarm vol.” settings
i-
α
ppli volume Silent “i-
α
ppli vol.” settings
Alarm volume for Schedule/To Do list/
Notice designate calls Silent “Phone vol.” settings
Confirmation, activation and
completion tones for recorded
messages, voice memos, etc. ON OFF “VM tone” settings
Keypad tone OFF “Keypad sound” settings
Microphone sensitivity during calls
*1
Up “Mic sensitiv.” settings
Holding tone Silent “Phone vol.” settings
Off when “Silent” is set.
Sounds at “Level 1” when an option other than
“Silent” is set.
On hold tone Silent “Phone vol.” settings
*2
Low voltage alarm OFF “LVA tone” settings
Even when “ON” is set, the low voltage alarm
sounds at “Level 1” if “Phone vol.” is set to “Silent”
for this function.
Reading out received mails “Phone” setting under “Ring volume” (p.69)
*3
Missed call/new mail confirmation
tones when a FOMA terminal is folded Silent “Phone vol.” settings
*2
ToruCa acquisition tone Silent “Phone vol.” settings
*4