Foma N902iX, Manual

Page: 544 / 574

27
(3) To cancel optimization
Click “ システム設定 ” (System settings).
“W-TCP
設定
” (W-TCP settings) screen appears.
Click “
最適化を解除する
” (Cancel optimization).
<For Windows 2000>
1
Start the program
(1) If you are operating from “FOMA PC 設
定ソフト ”(FOMA PC setting software)
Click “W-TCP 設定 ” (W-TCP settings) of “ マ
ニュアル設定 ” (Manual setup) after starting
the program.
(2) If you are operating from the task-tray
Click the “W-TCP icon” in the task-tray located
on the bottom-right of the desktop to start the
program.
2
Proceed with the following
(1) If the system settings have not been optimized
Select “3.6Mbps” and click “
最適化を行う
” (Optimize) on the “W-TCP
設定
” (W-TCP settings) screen.
Close all the programs open and restart the PC to enable the optimized settings.
(2) If the system settings have been
optimized
A message saying “ 現在、 3.6Mbps 用に最適
化されています。 ” (Already optimized for
3.6Mbps) appears on the “W-TCP 設定 ”
(W-TCP settings) screen.
When canceling the optimization settings to
execute communication via a device other
than a FOMA terminal, click “
最適化を解除す
る
” (Cancel optimization). Close all the
programs open and restart the PC to enable
the cancellation of the optimization.
Left-click