Maintenance 4-5
Aquastorm 200
The following steps are to be performed in the
sequence in which they are presented. Failure to
do so may result in personal injury or damage to
the equipment.
NOTE
Failure to perform any
of the Scheduled Maintenance
procedures may result in voiding
of warranty.
Front View of the Aquastorm 200™
Tools and Materials Required for Post
Shut-Down Check
•
Clean, White Paper Towels
•
Clean, White, Soft, Lint Free dry cloths
•
SD-20 All Purpose Cleaner
•
Windex window cleaner
•
Hose and Spray Nozzle
CAUTION
Do not use any solvent based or
orange peel based degreasers to
clean polypropylene surfaces. Use of
these chemicals will permanently
damage the polypropylene. NEVER
use Stainless Steel cleaner on
polypropylene parts. Permanent
damage to the polypropylene will
result. Only use SD-20 All Purpose
Cleaner or any All Purpose amonia
based cleaner. Cleaner must specify
on USE Label, "Safe to use on plastic
and vinyl surfaces". Never use
cleaning products that could damage
the outer polypropylene surface
Use ONLY white colored soft lint free
cloths to clean the polypropylene
surfaces. Colored cloths may contain
chemicals containing additives
damaging to the polypropylene
surface. Do not use Shop Towels. Shop
Towels contain chemicals which may
damage polypropylene surfaces.
Never use steel wool to clean the
outer polypropylene surface. Doing so
will damage the surface.
Summary of Contents for Aquastrom 200
Page 48: ......
Page 142: ...Aquastorm 200 Maintenance 4 49 ...
