4-24 Maintenance
Aquastorm 200
Align the Sides of the Gauge
Parallel to the edges of the Belt
Krikit II
TM
Belt Tension Gauge
50 - 150 Kg. Scale
100 - 320 Lb. Scale
7
The correct belt tension for your system's
blowers can be found on the Blower
Configuration Chart listed to the right.
Perform the procedure that follows to
verify the blower's belt tension.
How to Use the Krikit™ II
Belt Tension Gauge
The Krikit™ II belt tension gauge is calibrated
to measure Micro-V belt tensions from 50 - 150
Kg. (100 - 320 pounds).
Blower Configuration Chart
HP Hz Belt Belt Tension (Krikit
TM
II Gauge)
7.5
60
3 Strand
110 - 120 lbs. (50 - 54 kg.)
7.5
50
5 Strand
130 - 140 lbs. (59 - 64 kg.)
10
60
3 Strand
110 - 120 lbs. (50 - 54 kg.)
10
50
5 Strand
130 - 140 lbs. (59 - 64 kg.)
Place the gauge in the center of the belt and
align the sides of the gauge parallel to the edges
of the belt and mid-way between the two (2)
blower pulleys. (Refer to the photograph located
on the lower section of this page).
NOTE
Belt tension accuracy is dependent
on proper positioning of the
gauge.
Blower with Belt Cover Removed
Belt
Place Krikit II Tensioner
Gauge here
Summary of Contents for Aquastrom 200
Page 48: ......
Page 142: ...Aquastorm 200 Maintenance 4 49 ...
