36#
3-36 Start-Up and Operation
Aquastorm 200
2.4
AUTO START UP TIMER
The optional Auto Start-Up Timer automatically
activates the Aquastorm 200
TM
, provided power
has been left activated to the Aquastorm 200™,
and the water level in the Wash, Rinse, and
optional Chemical Isolation tanks is at the
operating float switch level.
Power to the Aquastorm 200™ can be activated
by turning on the Main Power Disconnect located
at the exit end of the system (supplied with 380
and 460 V systems only). See page 3-32 for
details on setting up the Auto Start Timer.
Main Power
Disconnect
2.5
PH MONITOR
The Aquastorm 200™ may be configured with
an optional pH Monitor, whereby pH levels from
0 - 14 are monitored in the wash tank by means
of a pH probe. pH levels are displayed on the
custom control panel's LCD.
For calibration of the pH Monitor and Probe,
refer to the Maintenance Section of this manual.
pH Transmitter
pH Probe Mounted in the Wash Tank
Summary of Contents for Aquastrom 200
Page 48: ......
Page 142: ...Aquastorm 200 Maintenance 4 49 ...
