Electrovert Aquastrom 200, Instruction Manual

Page: 13 / 170

Aquastorm 200
1-8 Overview
Dragout/ Enhanced Chemical
Isolation Section
The Drag Out/ Enhanced chemical isolation
section is 30.5 cm (36 inches) long, and may be
configured as one (1) of four (4) different
configurations:
1
Standard Chemical Isolation - standard
configuration is without airknives or spray
manifolds. Excess water drips from
product as it passes through this section.
This allows fewer contaminants to be
carried over to the rinse section.
NOTE When saponifier is being added to
the wash section and the rinse water
is recirculating, standard
configuration of the enhanced
chemical isolation will not provide
adequate separation.
2
Level 1 Chemical Isolation - this level may
be configured as an option with a 7.5 HP
Turbine blower and three (3) tubular
stainless steel airknives. The blower
delivers air through two (2) upper and one
(1) lower air knife.
Blower Air removes and squeegees excess
water containing contaminants from the
product prior to entering the
Recirculating Rinse section of the
Aquastorm 200™. Excess water removed
via the first set of airknives is routed back
to the wash section. This helps in
preventing loss of saponifier as well as
reducing the risk of cross contamination
between cleaning sections.
3
Level 2 Chemical Isolation - incorporates
the blower configuration in Level 1, and
adds two (2) stainless steel, one (1) upper
and one (2) lower, spray manifolds. The
spray manifolds are positioned between
the two (2) sets of airknives. The spray
bar water supply is via an exeternal feed,
customer supplied source. The spray bars
provide low volume spray to enhance the
removal of remaining saponifier solutions
remaining on the product. This
configuration of chemical isolation is
routed directly to drain, to eliminate cross
contamination.
4
Level 3 Enhanced Chemical Isolation -
includes both level 1 and 2 configurations,
but is supplied with optional on-board, 95
liter (25 gallon) tank in lieu of an external
water source plumbing configuration.
A
1
/
8
Hp internal recirculation pump
powers the spray manifolds. The tank is
also configured with one (1) 18 kW
immersion heater, auto fill, tank liquid
level floats, and rinse to chemical isolation
cascade. L evel 3 provides increased
isolation while conserving water usage.