Electrovert Aquastrom 200, Instruction Manual

Page: 27 / 170

Aquastorm 200
1-22 Overview
3.1 WATER REQUIREMENTS
NOTE Separate the incoming
water lines for Fill and
Final Rinse.
NOTE The immersion heaters in
the Recirculating Wash
and Rinse tanks will heat
incoming tap or treated
water after an initial
waiting period.
Electrovert recommends
supplying heated water 60
- 71
o
C (140 - 160
o
F) to
the Recirculating Wash
and Rinse tanks for make-
up water, to
maintain operating
temperatures.
Final Rinse
3 /
4
inch NPTM stainless steel pipe
User supplied, heated tap or
treated water to Final Rinse.
Temperature 60 - 71 o C (140 - 160 o F)
Flow Rate 15 - 19 Liters/ Min.
(4 - 5 Gallons/ Min.)
Nominal Pressure
2.8 - 3.3 kg/cm
2
(35 - 40 PSI)
System Drain
Common 1
1
/
2
inch NPTM, CPVC pipe;
38 Liters/ Min. (10 GPM) constant
Fill
3 /
4
inch NPTM stainless steel pipe
Heated water to 60 - 71
o
C
(140 - 160
o
F)
Flow Rate 15 - 19 liters/ min.
(4 - 5 gpm)
Pressure 2.8 Kg/cm 2
(35 - 40 psi)
SECTION 3 FACILITIES REQUIREMENTS
Final
Rinse
Inlet
Fill Inlet