Electrovert Aquastrom 200, Instruction Manual

Page: 19 / 170

Aquastorm 200
1-14 Overview
Optional Photocell Control
The photocell provides automatic standby mode
via photo-eye sensor. The photo sensor is to be
used in conjunction with the optional Angle
Adjustable Transition Conveyor or optionally
without the transition conveyor. The photo sensor
and reflector are mounted on the inlet conveyor
or on the entrance end of the conveyor system,
depending on the system configuration. Photocell
operation sequentially starts pumps, blowers and
final rinse as product passes the photocell. When
product has exited the conveyor (based on a fixed
time and distance), photocell operation stops
pumps, blowers and final rinse water. The
conveyor remains in operation to advance procuct
into the system. The system may be configured
to allow the blower to remain on with the
conveyor.
Auto Start Timer
By auto enabling the system fill solenoid and the
Wash and Rinse tank immersion heaters prior
to system start up, the Auto Start Timer
eliminates delays in production while the
Aquastorm 200™ system power is active.
Start and stop times for each day of the week
may be configured using the timer function
software and the LCD interface keypad.
Optional Detergent Injection
System
The Automatic Detergent Feed system provides
automatic feed with a calculated mixture of
saponifier or detergent from an internal 57 liter
(15 gallon) reservoir located just inside the rear
prewash section, into the wash section plumbing.
Anytime the fill solenoid is activated to add water
to the wash section, saponifier or detergent is
automatically injected into the wash plumbing as
water passes the venturi injector.
Optional Interior Lighting
The Aquastorm 200™ system may be configured
with three (3), 40 watt, 110 VAC, fluorescent
light fixtures which provide maximum viewing
capability as well as cost efficient lighting. The
interior lighting option permits the operator to
observe the entire cleaning process as product
passes through each stage of the system.