manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 97

95

Comfort

DS5_en_Chap03_confort_ed02-2015

F

  Switch off the demisting/defrosting 

of the rear screen and door mirrors 

as soon as appropriate, as lower 

current consumption results in 
reduced fuel consumption.

Front demist - 

defrost

Rear screen and door mirrors demist - 

defrost

F

  It is possible to stop the 

demisting/defrosting operation 
before it is switched off 
automatically by pressing the 
button again. The indicator 
lamp associated with the 
button goes off.

Automatic visibility programme

Switching on

With Stop & Start, when demisting has 
been activated, the STOP mode is not 
available.

Switching off

The demisting/defrosting switches off automatically 
to prevent an excessive consumption of current.

F

  Select this programme 

to demist or defrost the 
windscreen and side windows 
as quickly as possible.

The system automatically manages the air 
conditioning, air flow and air intake, and provides 
optimum distribution towards the windscreen and 
side windows.

F

 

To stop the programme, press either 

the 

"visibility"

 button again or 

"AUTO"

, the 

indicator lamp in the button goes off and the 
indicator lamp in the 

"AUTO"

 button comes on.

The system starts again with the values in use 
before it was overridden by the visibility programme.

F

  Press this button (located on 

the air conditioning system 
control panel) to demist/defrost 
the rear screen and the door 
mirrors. The indicator lamp 
associated with the button 
comes on.

The rear screen demist - defrost 
can only operate when the engine is 
running.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands