manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 152

DS5_en_Chap05_visibilite_ed02-2015

Manual adjustment of 
halogen headlamps

Automatic adjustment of 
xenon headlamps

To avoid causing a nuisance to other road 
users, the height of the halogen headlamps 
should be adjusted according to the load in the 
vehicle.

0.

  1 or 2 people in the front seats.

-.

  Intermediate setting.

1.

  5 maximum authorised load.

-.

  Intermediate setting.

2.

   maximum authorised load.

-.

  Intermediate setting.

3.

  5 maximum load in the boot.

If a fault occurs, this warning lamp 
is displayed in the instrument panel, 
accompanied by an audible signal 
and a message in the instrument 
panel screen.

In order to avoid causing a nuisance to other 
road users, this system corrects the height of the 
xenon headlamps beam automatically and when 
stationary, in relation to the load in the vehicle.

If a fault occurs, do not touch the xenon 
bulbs.
Contact a CITROËN dealer or a 
qualified workshop.

The system then places your headlamps in the 
lowest position.

Headlamp beam height adjustment

The initial setting is position 

"0"

.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands