manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 108

DS5_en_Chap04_conduite_ed02-2015

Emergency braking

The emergency braking must only be used in 
exceptional circumstances.

If a failure of the DSC system is signalled 
by the illumination of this warning lamp, 
then braking stability is not guaranteed.
In this event, stability must be assured 
by the driver by repeating alternate "pull-

release" actions on the control lever 

A

.

In the event of a failure of the main 
service brake or in an exceptional 
situation (e.g. driver taken ill, under 
instruction, etc) a continuous pull 

on the control lever 

A

 will stop the 

vehicle.

The DSC system provides stability when 
braking during emergency braking.
If the emergency braking malfunctions, the 
message "Parking brake control faulty" will be 
displayed.

Special situations

To ensure correct operation, and so 
your safety, the number of successive 
applications and releases of the parking 
brake is limited to eight cycles.
If used excessively, you are alerted by 
the message "parking brake faulty" and 
a flashing warning lamp.

In some circumstances (engine start...), 
the parking brake may adjust the level 
of application itself. This is normal 
operation.
To move your vehicle a few centimetres 
without starting the engine, with the 
ignition on, press the brake pedal and 
release the parking brake 

by pulling

 

then 

releasing

 the control lever 

A

. 

Complete release of the parking brake 
is indicated by the warning lamps in the 

control lever 

A

 and in the instrument 

panel going off and by the display of the 
message "Parking brake off".

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands