manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 200

DS5_en_Chap08_info-pratiques_ed02-2015

Repair procedure

F

  Switch off the ignition.

F

  Uncoil the white pipe 

G

 fully.

F

  Unscrew the cap from the white pipe.

F

  Connect the white pipe to the valve of the 

tyre to be repaired.

F

  Connect the compressor's electric plug to 

the vehicle's 12 V socket.

F

  Start the vehicle and leave the engine 

running.

Take care, this product is harmful 
(e.g. ethylene-glycol, colophony...) if 
swallowed and causes irritation to the eyes.
Keep this product out of the reach of 
children.

Avoid removing any foreign bodies 
which have penetrated into the tyre.

1. Sealing

F

  Turn the selector 

A

 to the "sealant" 

position.

F

  Check that the switch 

B

 is in 

position 

"O"

.

The vehicle's electric system allows the 
connection of a compressor for long 
enough to inflate a tyre after a puncture 
repair or for inflating a small inflatable 
accessory.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands