manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 23

21

Monitoring

Rear foglamps

fixed.

The rear foglamps are on.

Turn the ring on the stalk rearward to switch off the 
rear foglamps.

Warning / indicator lamp

State

cause

Action / Observations

diesel engine 
pre-heating

fixed.

The 

START/STOP

 switch has been 

pressed (ignition on).

Wait until the warning lamp goes off before starting.
Once it goes off, starting is immediate, on condition 
that the brake pedal remains pressed with an 
automatic gearbox, or the clutch pedal is pressed fully 
down with a manual gearbox.
The period of illumination of the warning lamp is 
determined by the ambient conditions (up to about 
thirty seconds in severe winter conditions).
If the engine does not start, switch the ignition off and 
then on, wait until the warning lamp goes off again, 
then start the engine.

Electric parking 
brake

fixed.

The electric parking brake is applied.

Release the electric parking brake to switch off the 

warning lamp: with your foot on the brake pedal, pull 

the electric parking brake control lever.

Observe the safety recommendations.

For more information on the electric parking brake, 

refer to the corresponding section.

deactivation of 
the automatic 
functions of the 
electric parking 
brake

fixed.

The "automatic application" (on 
switching off the engine) and 
"automatic release" functions are 
deactivated or faulty.

Activate the function (depending on the country of 
sale) via the vehicle configuration menu or contact a 
CITROËN dealer or a qualified workshop if automatic 
application / release is not possible.
For more information on the electric parking brake, 
refer to the corresponding section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands