manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 59

57

Access

DS5_en_Chap02_ouvertures_ed02-2015

Back-up key

Unlocking / Locking using the integral key with Keyless 
Entry and Starting

The integral key is used to lock and unlock the 
vehicle when the electronic key cannot operate:
-  cell battery flat, vehicle battery discharged 

or disconnected, ...

-  vehicle located in an area with strong 

electromagnetic signals.

F

  Maintain a pull on button 

1

, to extract the 

integral key 

2

.

If the alarm is activated, the audible 
signal triggered on opening a door 
with the key (integral with the remote 
control) will stop when the ignition is 
switched on.

Locking the driver's  
door

F

  Insert the integral key in the door lock, then 

turn it to the rear.

Unlocking the driver's  
door

F

  Insert the integral key in the door lock, then 

turn it to the front.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands