manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 156

DS5_en_Chap05_visibilite_ed02-2015

Rear wiper

If a significant accumulation of snow 
or ice is present, or when using a 
bicycle carrier on the boot, deactivate 
the automatic rear wiper via the 
configuration menu.

park,

intermittent wipe,

wash-wipe (set duration).

Reverse gear

When reverse gear is engaged, the rear wiper 
will come into operation if the windscreen 
wipers are operating.

The function is activated or 
deactivated via the configuration 
menu.
This function is activated by default.

Programming

F

  Pull the windscreen wiper stalk towards 

you. The windscreen wash then the 
windscreen wipers operate for a fixed 
period.

The headlamp washers only operate when 

the 

dipped or main beam headlamps are on

,

 

with the vehicle moving

.

Windscreen and headlamp 
wash

Rear wiper selection ring:

To reduce the consumption of the fluid by the 
headlamp washers, they operate only with 

every seventh use of the screenwash or every 

25 miles (40 km) during a given journey.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands