manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 248

DS5_en_Chap09_verifications_ed02-2015

On vehicles fitted with Diesel engines, the fuel 
system must be primed if you run out of fuel.

Running out of fuel (Diesel)

For more information on the Diesel 
misfuel prevention device, refer to the 
corresponding section.

If the engine does not start first time, 
don't keep trying but start the procedure 
again from the beginning.

BlueHdi engines

F

  Fill the fuel tank with at least five litres of 

Diesel.

F

  Switch on the ignition (without starting the 

engine).

F

  Wait around 6 seconds and switch off the 

ignition.

F

  Repeat the operation 10 times.

F

  Operate the starter to run the engine.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands