manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 204

DS5_en_Chap08_info-pratiques_ed02-2015

Changing a wheel

The jack is stowed in a box attached to the 
spare wheel.
The assembly is secured under the vehicle by 
means of a winch system.

Refer to the "Access to the spare wheel" 

section.
To open the tool box:

F

  press the tab, slide the lid on the box half 

way, then remove it.

Access to the tools

Procedure for changing a wheel with a damaged or punctured tyre for the spare wheel using the tools provided with the vehicle.

The other tools are stowed in a well under the 
boot floor.

The jack must only be used to change 
a wheel with a damaged or punctured 
tyre.
Do not use any jack other than the one 
supplied with this vehicle.
If the vehicle does not have its original 
jack, contact a CITROËN dealer or a 
qualified workshop to obtain the correct 
jack for it.
The jack does not require any 
maintenance.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands