manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 214

DS5_en_Chap08_info-pratiques_ed02-2015

The headlamps are fitted with 
polycarbonate glass with a protective 
coating:

F

 

do not clean them using a dry 
or abrasive cloth, nor with a 
detergent or solvent product,

F

  use a sponge and soapy water or a 

pH neutral product,

F

  when using a high pressure washer 

on persistent marks, do not keep 
the lance directed towards the 
lamps or their edges for too long, 
so as not to damage their protective 
coating and seals.

Changing a bulb should only be done 
after the headlamp has been switched 
off for several minutes (risk of serious 
burns).

F

  Do not touch the bulb directly with 

your fingers, use a lint-free cloth.

It is imperative to use only anti-
ultraviolet (UV) type bulbs to avoid 
damaging the headlamp.
Always replace a failed bulb with a 
new bulb with the same type and 
specification.

daytime running lamps / sidelamps

For the replacement of this type of LED lamp 
and lighting guides, contact a CITROËN dealer 
or a qualified workshop.
A replacement kit for the LEDs is available from 
CITROËN dealers.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands