manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 206

DS5_en_Chap08_info-pratiques_ed02-2015

Taking out the spare wheel

F

  Raise the floor to reveal the spare wheel 

carrier drive nut.

F

  Turn this drive nut fully clockwise, using 

the wheelbrace 

1

 and the extension 

7

, to 

unwind the winch cable, until the spare 
wheel is flat on the ground. Unwind the 
length needed for access to the wheel.

F

  Detach the assembly of wheel and box 

from the rear of the vehicle.

F

  Straighten the spare wheel for access to 

the spare wheel.

F

  Detach the link piece from the tool box lid.

F

  Pass the link piece through the middle of 

the wheel to free it.

When the spare wheel is fitted in place 
of a punctures wheel, you must refit the 
winch carrier and tool box under the 
vehicle before setting off.
Refer to the "Putting the winch carrier 
and spare wheel back in place" section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands