manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 119

117

Driving

DS5_en_Chap04_conduite_ed02-2015

Under-inflation alert

The alert is given by the fixed illumination 
of this warning lamp, accompanied by 
an audible signal, and depending on 
equipment, the display of a message.

In the event of a problem on one of the tyres, 
the symbol or the message appears, according 
to equipment, to identify it.

F

  Reduce speed, avoid sudden steering 

movements or harsh brake applications.

F

  Stop as soon as it is safe to do so.

The alert is maintained until the tyre or 
tyres concerned is reinflated, repaired 
or replaced.
The spare wheel (space-saver type or a 
steel rim) does not have a sensor.

The loss of pressure detected does not 
always lead to visible deformation of 
the tyre.
Do not rely on just a visual check.

Operating fault

The flashing and then fixed 
illumination of the under-inflation 
warning lamp accompanied by the 
illumination of the service warning 
lamp indicates a fault with the system.

This alert is also displayed when one or 
more wheels is not fitted with a sensor 
(for example, a space-saver or steel 
spare wheel).

Go to a CITROËN dealer or a qualified 
workshop to have the system checked or, 
following the repair of a puncture, to have the 
original wheel, equipped with a sensor, refitted.

In this case, monitoring of the tyre pressures is 
not assured.

F

  If you have a compressor (the one in the 

temporary puncture repair kit for example), 
check the four tyre pressures when cold.

 

If it is not possible to check the tyre 
pressures at the time, drive carefully at 
reduced speed.

 or

F

  In the event of a puncture, use the 

temporary puncture repair kit or the spare 
wheel (according to equipment).

Any tyre repair or replacement on a wheel 
fitted with this system must be carried out by a 
CITROËN dealer or a qualified workshop.
If after changing a tyre, a wheel is not detected 
by your vehicle (fitting snow tyres for example), 
you must have the system reinitialised by a 
CITROËN dealer or a qualified workshop.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands