manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 106

DS5_en_Chap04_conduite_ed02-2015

With the ignition on or the engine running, to 
release the parking brake, 

press

 the 

brake

 

pedal

, 

pull

 then release control lever 

A

.

The full release of the parking brake is 
confirmed by:

Manual release

-  the braking warning lamp and 

the 

P

 warning lamp in the control 

lever 

A

 going off,

-  display of the message "Parking 

brake off".

If you pull the control lever 

A

 without pressing 

the brake pedal, the parking brake will not 
be released and a message appears in the 
instrument panel.

Before leaving the vehicle, check that 
parking brake warning lamps in the 
instrument panel and the control lever 

A

 

are on fixed, not flashing.

With the vehicle stationary, to apply the parking 
brake whether the engine is running or off, 

pull

 

control lever 

A

.

Manual application

The application of the parking brake is 
confirmed by:

-  illumination of the braking warning 

lamp and of the 

P

 warning lamp in 

the control lever 

A

,

-  display of the message "Parking 

brake on".

With the engine running, when the driver's 
door is opened there is an audible signal and a 
message is displayed if the parking brake has 
not been applied - unless the selector lever is 

in position 

P

 (Park) in the case of an automatic 

gearbox.

Maximum application is essential:

-  in the case of a vehicle towing a caravan 

or a trailer, if the automatic functions are 
activated but you are applying the parking 
brake manually,

-  when the slope you are parked on may 

vary (e.g. on a ferry, on a lorry, during 
towing).

If necessary, you can make a 

maximum 

application

 of the parking brake. It is obtained 

by means of a 

long pull

 on control lever 

A

, 

until you see the message "Parking brake 
applied fully" and an audible signal is heard.

In the case of towing, a loaded vehicle 
or parking on a gradient, make a 
maximum application of the parking 
brake then turn the front wheels 
towards the pavement and engage a 
gear when you park.
After a maximum application, the 
release time will be longer.

Maximum application

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands