DS Automobiles DS 5 Handbook Download Page 245

Page: 245 / 376

243

Checks

DS5_en_Chap09_verifications_ed02-2015

Bonnet

Opening

Before doing anything under the

bonnet, switch off the Stop & Start

system to avoid any risk of injury
resulting from an automatic change to
START mode.

closing

Lower the bonnet and release it at the end

of its travel.

Check that it is latched correctly.

From the outside

: lift the safety catch and

raise the bonnet.

A bonnet strut opens the bonnet and holds it
open.

Because of the presence of electrical

equipment under the bonnet, it is
recommended that exposure to water
(rain, washing, ...) be limited.

The cooling fan may start after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.

From inside:

pull the release lever, located

on the left below the dashboard, towards
you.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands