manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 178

DS5_en_Chap06_securite-enfants_ed02-2015

Electric child lock

Remote control system to prevent opening of the rear doors using their interior controls and use of the rear electric windows.

Switching on

Switching off

Any other status of the indicator lamp 
indicates a fault with the electric child 
lock.
Have it checked by a CITROËN dealer 
or a qualified workshop.

This system is independent and in no 
circumstances does it take the place of 
the central locking control.
Check the state of the child lock each 
time you switch on the ignition.
Always remove the key from the ignition 
when leaving the vehicle, even for a 
short time.
In the event of a serious impact, the 
electric child lock is switched off 
automatically to permit the exit of the 
rear passengers.

F

  With the ignition on, press this 

button.

F

  With the ignition on, press this 

button again.

The indicator lamp in the button comes on, accompanied 
by a message to confirm that the child lock is on.
This indicator lamp remains on until the child lock is 
switched off.

The indicator lamp in the button goes off, 
accompanied by a message to confirm that the 
child lock is off.
This indicator lamp remains off while the child 
lock is switched off.

It is still possible to open the doors from 
the outside and operate the rear electric 
windows from the driver's control panel.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands