DS Automobiles DS 5, Handbook

Page: 202 / 376

DS5_en_Chap08_info-pratiques_ed02-2015
F
Turn the selector A to the "air"
position.
F
Uncoil the black pipe
H
fully.
F
Connect the black pipe to the
valve of the wheel.
F
Connect the compressor's electric plug to
the vehicle's 12 V socket.
F
Start the vehicle again and leave the
engine running.
F
Adjust the pressure using the compressor
(to inflate: switch
B in position "I"
;
to deflate: switch
B in position "O"
and
press button c
), in accordance with the
vehicle's tyre pressure label (located on the
left hand door aperture).
A loss of pressure indicates that the
puncture has not been fully plugged;
contact a CITROËN dealer or qualified
workshop for assistance.
F
Remove and stow the kit.
F
Drive at reduced speed (50 mph [80 km/h]
max) limiting the distance travelled to
approximately 120 miles (200 km).
As soon as possible, go to a CITROËN
dealer or a qualified workshop.
You must inform the technician that you
have used this kit. After inspection, the
technician will advise you on whether
the tyre can be repaired or if it must be
replaced.
2. Inflation