manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 189

187

Safety

DS5_en_Chap07_securite_ed02-2015

Front seat belt height adjustment

F

  To adjust the anchorage point, squeeze the 

control and slide it until you find a notch.

From approximately 12 mph 
(20 km/h), the warning lamp(s) flash 
for two minutes accompanied by 
an audible signal. Once these two 

minutes have elapsed, the warning lamp(s) 
remain on until the driver or one or more 
passengers fasten their seat belt.

Seat belt not fastened / 
unfastened warning lamps*

1.

  Front and/or rear seat belts not fastened / 

unfastened warning lamp in the instrument 
panel.

2.

  Front left seat belt warning lamp.

3.

  Front right seat belt warning lamp.

4.

  Rear right seat belt warning lamp.

5.

  Rear centre seat belt warning lamp.

6.

  Rear left seat belt warning lamp.

Front seat belt warning lamps

On switching on the ignition, warning 
lamp 

1

 comes on in the instrument 

panel and the corresponding warning 
lamp 

2

 and/or 

3

 come(s) on in red 

in the passenger's seat belt and front airbag 
warning lamp display, if the corresponding seat 
belt is not fastened or is unfastened.

Rear seat belt warning lamps

On switching on the ignition, the 
corresponding warning lamps 

4

, 

5

 and 

6

 come on in red for about 30 seconds 

if a seat belt is not fastened.

Above 12 mph (20 km/h), the corresponding 
warning lamps 

4

, 

5

 or 

6

 comes on in red, 

accompanied by an audible signal and a 
message in the instrument panel screen, when 
a rear passenger has unbuckled their seat belt.

* Depending on version and/or country of sale.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands