manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 157

155

Visibility

DS5_en_Chap05_visibilite_ed02-2015

Automatic rain sensitive 
windscreen wipers

The windscreen wipers operate automatically, 
without any action on the part of the driver, if 
rain is detected (sensor behind the rear view 
mirror), adapting their speed to the intensity of 
the rainfall.

Switching on

Briefly push the control stalk 
downwards.
A wiping cycle confirms that the 
instruction has been accepted.

Briefly push the control stalk 
downwards again, or place the 
control stalk in another position 

 

(Int, 1 or 2).

Switching off

The automatic rain sensitive windscreen 
wipers must be reactivated by pushing 
the control stalk downwards, if the 
ignition has been off for more than 

 

one minute.

This warning lamp goes off in the instrument 
panel and a message is displayed.

This warning lamp comes on in the instrument 
panel and a message is displayed.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands