manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 187

185

Safety

DS5_en_Chap07_securite_ed02-2015

dSc/ASR

After an impact, have these systems 
checked by a CITROËN dealer or a 
qualified workshop.

The DSC and ASR systems offer increased 
safety in normal driving, but they should not 
encourage the driver to take extra risks or 
drive at high speed.
It is in conditions of reduced grip (rain, 
snow, black ice) that the risk of loss of grip 
increases. It is therefore important for your 
safety to keep the DSC and ASR systems 
activated in all conditions, and particularly 
in difficult conditions.

The correct operation of these systems 
depends on observation of the 
manufacturer's recommendations regarding 
as much the wheels (tyres and rims), 
braking and electronic components as the 
assembly and repair procedures used by 
CITROËN dealers.
To benefit in full from the effectiveness 
of the DSC and ASR systems in wintry 
conditions, the vehicle must be fitted with 
four snow tyres, allowing the the vehicle to 
retain neutral handling on the road.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands