DS Automobiles DS 5 Handbook Download Page 77

Page: 77 / 376

Comfort

DS5_en_Chap03_confort_ed02-2015

The head restraint is fitted with a frame
with notches which prevents it from
lowering; this is a safety device in case
of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.

Never drive with the head restraints
removed; they must be in place and
adjusted correctly.

Head restraint height and
angle adjustment

To raise a head restraint, pull it upwards.

To remove the head restraint, press the

lug

and pull the head restraint upwards.

To put the head restraint back in place, engage
the head restraint stems in the openings
keeping them in line with the seat back.

To lower the head restraint, press the lug

and push down on the head restraint at the
same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands