manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 86

DS5_en_Chap03_confort_ed02-2015

Mats

Fitting

To fit the mat on the driver's side:

F

  move the seat fully back,

F

  fit the mat in place,

F

 

engage the fixings by pressing down on them.

Removal

To remove the mat on the driver's side:

F

  move the seat fully back,

F

  disengage the fixings, leaving the fixing 

pins in the floor carpet,

F

  remove the mat.

Refitting

To refit the mat on the driver's side:

F

  position the mat correctly,

F

  refit the fixings by pressing,

F

  check that the mat is secured correctly.

To avoid any risk of jamming of the 
pedals:
-  only use mats which are suited to 

the fixings already present in the 
vehicle; these fixings must be used,

-  never fit one mat on top of another.
The use of mats not approved by 
CITROËN may interfere with access to 
the pedals and hinder the operation of 
the cruise control / speed limiter.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands