manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 134

DS5_en_Chap04_conduite_ed02-2015

Temporarily exceeding the 
programmed speed

Switching off

Operating fault

The use of mats not approved by 
CITROËN may interfere with the 
operation of the speed limiter.
To avoid any risk of jamming of the 
pedals:
-  ensure that the mat is positioned 

correctly,

-  do not fit one mat on top of another.

F

  If you want to temporarily exceed the 

programmed limit speed, press 

firmly

 on 

the accelerator pedal, going beyond the 

point of resistance

.

The speed limiter is deactivated temporarily 
and the displayed programmed speed flashes.

F

  Turn wheel 

1

 to the 

"0"

 position: the 

display of information on the speed limiter 
disappears.

Flashing dashes indicate a fault with the speed 
limiter.

On a steep descent or in the event of 
sharp acceleration, the speed limiter 

will not be able to prevent the vehicle 

from exceeding the programmed speed.

When the limit speed is exceeded but is not 
due to action by the driver, there is an audible 
signal to complete the alert.
Once the speed of the vehicle returns to 
the programmed setting, the speed limiter 
functions again: the display of the programmed 
speed setting becomes steady again.

Have it checked by a CITROËN dealer or a 
qualified workshop.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands