manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 233

231

Practical information

DS5_en_Chap08_info-pratiques_ed02-2015

Towing a trailer

We recommend the use of genuine 
CITROËN towbars and their harnesses 
that have been tested and approved 
from the design stage of your vehicle, 
and that the fitting of the towbar is 
entrusted to a CITROËN dealer or a 
qualified workshop.
If the towbar is not fitted by a 
CITROËN dealer, it must still be 
fitted in accordance with the vehicle 
manufacturer's instructions.

Your vehicle is primarily designed for 
transporting people and luggage, but it may 
also be used for towing a trailer.

When not towing a trailer, remove the 
quickly-detachable tow ball before 
driving, so as to avoid masking the 
central rear lamp.

Driving with a trailer places greater 
demands on the towing vehicle and the 
driver must take particular care.
For more advice on driving when 
towing, refer to the corresponding 
section.

For more information on weights (and 
the towed loads which apply to your 
vehicle) refer to the corresponding 
section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands