DS Automobiles DS 5, Handbook

Page: 71 / 376

69
Access
DS5_en_Chap02_ouvertures_ed02-2015
Reinitialisation
If the blind meets an obstacle during
operation, you must reverse the
movement of the blind. To do this,
press the control switch for the blind in
question.
When the driver operates the blind
control switch, they must ensure that
no one is preventing correct closing of
the blind.
The driver must ensure that passengers
use the blind correctly.
Be particularly aware of children when
operating the blind.
If the blind opens again on its own
during a closing movement or soon
after stopping:
F
operate the control switch until the
blind is fully open,
F
then operate the control switch until
the blind is fully closed.
The safety anti-pinch function is not
operational during these operations.
In the event of a failure or battery disconnection
while a blind is moving or soon after it stops,
the safety anti-pinch must be reinitialised.
For each blind control switch:
F
operate the control until the blind is fully
closed,
F
continue to press for at least 3 seconds.
A slight movement of the blind will then be
noticeable, confirming the reinitialisation.