manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 186

dynamic stability control (dSc) 
and anti-slip regulation  
(ASR)

Activation

These systems are activated automatically 
each time the vehicle is started.
As soon as they detect a problem of grip or 
trajectory, these systems act on the operation if 
the engine and brakes.

This is indicated by flashing of this 
warning lamp in the instrument panel.

deactivation

Operating fault

Illumination of this warning lamp and 
the lamp in the deactivation button, 
accompanied by an audible signal 
and a message, indicate a fault with 
the system.

Reactivation

F

  Press this button.

The indicator lamp in the button 
comes on.

The DSC and ASR systems no longer act 
on the operation of the engine and on the 
brakes in the event of a involuntary change of 
trajectory.

F

  Press this button again.

The indicator lamp in the button 

 

goes off.

Reactivate the systems as soon as the level of 
grip permits.

Contact a CITROËN dealer or a qualified 
workshop to have the system checked.

In exceptional conditions (starting a vehicle 
which is bogged down, stuck in snow, on soft 
ground...), it may be advisable to deactivate 
the DSC and ASR, so that the wheels can turn 
freely and regain grip.

The systems are reactivated automatically each 
time the ignition is switched back on or from 
30 mph (50 km/h).
Below 30 mph (50 km/h), you can reactivate 
them manually:

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands