manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 242

DS5_en_Chap09_verifications_ed02-2015

Low fuel level

When the low fuel level in the tank is 
reached, this warning lamp comes on in 
the instrument panel, accompanied by 
an audible warning and a message in 
the instrument panel screen.

Fuel supply cut-off

Fuel used for petrol engines

The petrol engines are compatible with 
E10 bio-petrol (containing 10 % ethanol), 
conforming to European standards EN 228 and 
EN 15376.
E85 type fuels (containing up to 85 % ethanol) 
are reserved exclusively for vehicles marketed 
for the use of this type of fuel (BioFlex 
vehicles). The quality of the ethanol must 
comply with European standard EN 15293.

When it first comes on, around 6 litres of fuel 
remain in the tank.
Until sufficient fuel has been added, this 
warning lamp appears every time the ignition 
is switched on, accompanied by an audible 
signal and a message. This audible signal 
and message are repeated with increasing 
frequency as the fuel level drops and 
approaches "0".
You must refuel as soon as possible to avoid 
running out.

Your vehicle is equipped with a safety device 

which cuts off the fuel supply in the event of a 

collision.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands