manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 208

DS5_en_Chap08_info-pratiques_ed02-2015

Removing a wheel

Parking the vehicle

Immobilise the vehicle where it does not 
block traffic: the ground must be level, 
stable and not slippery.
Apply the parking brake unless it has 
been programmed to automatic mode, 
switch off the ignition and engage first 
gear* to block the wheels.
Check that the braking warning lamp 
and the 

P

 warning lamp in the parking 

brake control lever come on.
If necessary, place a chock against 

the wheel opposite the wheel to be 

changed.
The occupants must get out of the 
vehicle and wait where they are safe.

List of operations

F

  Depending on equipment, remove the protective cover from from each of bolts using the tool 

3

 

or remove the wheel trim using tool 

4

.

F

  Fit the security socket 

5

 on the wheelbrace 

1

 to slacken the security bolt (if fitted).

F

  Slacken the other bolts (no more than a 1/4 turn) using the wheelbrace 

1

 only.

* Position 

P

 for an automatic gearbox.

Never go underneath a vehicle raised 
using a jack; use an axle stand.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands