manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 165

163

Child safety

DS5_en_Chap06_securite-enfants_ed02-2015

Child seat at the front*

Rearward facing

Forward facing

Ensure that the seat belt is correctly 

tensioned.
For child seats with a support leg, 
ensure that the support leg is in firm 
and stable contact with the floor. If 
necessary, adjust the passenger seat.

Passenger seat in the fully back and 
highest position.

When a rearward facing child seat is installed 

on the 

front passenger seat

, adjust the seat 

to the fully back and highest position, with the 
backrest straightened.
The passenger's front airbag must be 
deactivated. Otherwise, 

the child

 

risks

 

being 

seriously injured or killed if the airbag

 

is 

deployed

.

When a forward facing child seat is installed on 

the 

front passenger seat

, adjust the vehicle's 

seat to the fully back and highest position 
with seat backrest straightened and leave the 
passenger's front airbag activated.

*  Refer to the legislation in force in your country 

before carrying your child in this seating 
position.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands