manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 309

307

Audio and Telematics

DS5_en_Chap11d_RD5_ed02-2015

QUESTION

ANSWER

SOLUTION

In "Random all" play, not 
all of the tracks are played.

In "Random all" play, the system can only take into account up to 
999 tracks.

With the engine off, the 
audio system switches off 
after a few minutes of use.

When the engine is switched off, the audio system operating time 
depends on the state of charge of the battery.
The switch-off is normal: energy economy mode is activated 
automatically to preserve the state of charge of the vehicle's 
battery. (See the "Energy Economy Mode" section).

Start the vehicle's engine to increase the battery 
charge.

The message "the audio 
system is overheated" 
appears on the display.

In order to protect the installation if the surrounding temperature 
is too high, the audio system switches to an automatic thermal 
protection mode leading to a reduction of the volume or stopping of 
the playing of the CD.

Switch the audio system off for a few minutes to 
allow the system to cool.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands