manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 216

DS5_en_Chap08_info-pratiques_ed02-2015

Front foglamps

F

  Remove the deflector under the body.

F

  Disconnect the bulb connector.

F

  Turn the bulb a quarter of a turn, withdraw 

and change it.

To refit, carry out these operations in reverse 

order.
To replace these bulbs you may also contact a 
CITROËN dealer or a qualified workshop.

direction indicators

Faster flashing of a direction indicator 
warning lamp (left or right) indicates a 
failed bulb on that side.

The direction indicator bulb is located below 
the front lamp.

F

  Turn the bulb holder a quarter turn and pull 

it out.

F

  Remove the bulb and change it.

For reassembly, carry out these operations in 
reverse order.
You can also contact a CITROËN dealer or a 
qualified workshop for the replacement of these 
bulbs.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands