manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 259

257

Checks

DS5_en_Chap09_verifications_ed02-2015

Every time the ignition is switched on, the 
SERVICE and engine diagnostic warning 
lamps come on and the UREA warning lamp 
flashes, accompanied by an audible signal and 
the display of the message "Emissions fault: 
Starting prevented".

Starting prevented

To be able to start the engine, you must call on 
a CITROËN dealer or a qualified workshop.

You have exceeded the authorised 
driving limit: the starting prevention 
system inhibits engine starting.

Freezing of the AdBlue

®

 

additive

The AdBlue

®

 additive freezes at 

temperatures below around -11°C.
The SCR system includes a heater 
for the AdBlue

®

 tank, allowing you to 

continue driving in very cold conditions.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands