manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 276

DS5_en_Chap10_caracteristiques_ed02-2015

Identification markings

Various visible markings for the identification of your vehicle.

A.

 

vehicle Identification Number (vIN) 
under the bonnet.

 

 

This number is engraved on the bodywork 
near the damper support.

The tyre pressures must be checked 
when the tyres are cold, at least once 
a month.

If the tyre pressures are too low, this 

increases fuel consumption.

B.

 

vehicle identification Number (vIN) on 
the windscreen lower cross member.

 

 

This number is indicated on a self-adhesive 
label which is visible through the windscreen.

c.

 

Manufacturer's label.

 

 

The VIN is indicated on a self-destroying 
label affixed to the door aperture, on the 
passenger's side.

d.

 

Tyre/paint label.

 

 

This label is affixed to the centre pillar, on 
the driver's side.

It bears the following information:
-  the tyre inflation pressures, laden and 

unladen,

-  the tyre sizes,
-  the inflation pressure of the spare wheel,
-  the paint colour code.

The rear quarter light cannot be etched 
as it is made of polycarbonate material.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands