manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 22

Warning / indicator lamp

State

cause

Action / Observations

Left-hand 
direction indicator

flashing with buzzer.

The lighting stalk is pushed down.

Right-hand 
direction indicator

flashing with buzzer.

The lighting stalk is pushed up.

Sidelamps

fixed.

The lighting stalk is in the 
"Sidelamps" position.

dipped beam 
headlamps

fixed.

The lighting stalk is in the "Dipped 
beam headlamps" position.

Main beam 
headlamps

fixed.

The lighting stalk is pulled towards 
you.

Pull the stalk to return to dipped beam headlamps.

Front  
foglamps

fixed.

The front foglamps are switched on 
using the ring on the lighting control 
stalk.

Turn the ring on the lighting control stalk rearward 
twice to switch off the front foglamps.

For more information on the lighting controls, refer to the corresponding section.

Automatic 
headlamp 
dipping

fixed.

The lighting stalk has been pulled 
towards you and the button has been 
pressed.
Its indicator lamp is on.

The camera, located in the interior rear view mirror, 
authorises or not switching between main and dipped 
beam, depending on the exterior lighting and the 
driving conditions.
Pulling the lighting stalk to return to dipped beam.

Operation indicator lamps

If one of the following indicator lamps comes on in the instrument panel and/or instrument panel screen, this confirms that the corresponding system has come into operation.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands