manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 55

53

Access

DS5_en_Chap02_ouvertures_ed02-2015

Selective boot unlocking

Locking the vehicle

Locking is confirmed by fixed 
illumination of the direction indicators 
for approximately two seconds.
Depending on version, the door mirrors 
fold at the same time.

F

  Press the closed padlock to fully 

lock the vehicle.

F

  Hold the button down until the 

windows close completely.

F

  Press this button until you hear 

the boot unlock. The doors 
remain locked.

Be particularly aware of children when 
operating the windows.

If one of the doors or the boot is not fully 
closed, locking does not take place.
When the vehicle is locked, if it 
is unlocked inadvertently, it will 
automatically lock itself again after 
about thirty seconds unless a door is 
opened.
If the alarm was previously activated, it 
will not be reactivated automatically.

If selective boot unlocking is 
deactivated, pressing this button 
unlocks the whole vehicle.

The selective boot unlocking function 
is set in the vehicle configuration 
menu.
By default, selective boot unlocking 
is on.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands