manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 205

203

Practical information

DS5_en_Chap08_info-pratiques_ed02-2015

List of tools*

Access to the spare wheel

The spare wheel is supported by a winch 
carrier system underneath the vehicle.

Tyre under-inflation detection

The spare wheel is not fitted with a 
sensor. The punctured wheel must be 
repaired by a CITROËN dealer or a 
qualified workshop.

1.

  Wheelbrace.

 

For removing the wheel trim and removing 
the wheel bolts.

2.

  Jack with integral handle.

 

For raising the vehicle.

3.

  Wheel bolt cover removal tool.

 

For removing the bolt head protectors on 
alloy wheels.

4.

  Wheel trim remover.

 

For removing the alloy wheel finishers.

5.

  Socket for the security bolts (located in the 

glove box).

 

For adapting the wheelbrace to the special 
"security" bolts.

6.

  Chock.

 

For blocking the vehicle's wheels.

7.

  Wheelbrace extension.

 

For slackening/tightening the spare wheel 
carrier nut.

8.

  Removable towing eye.

* Depending on country of sale.

For more information on towing the vehicle, 
refer to the corresponding section.

All of these tools are specific to your 

vehicle and can vary according to 
equipment.
Do not use them for any other 
purposes.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands