manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 25

23

Monitoring

deactivation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message in the instrument panel screen.

Warning / indicator lamp

State

cause

Action / Observations

Passenger's 
airbag system

fixed in the instrument 
panel and/or seat belt 
and front passenger's 
airbag warning lamps 
display.

The control switch, located in the 
glove box, is set to the 

OFF

 position.

The passenger's front airbag is 
deactivated.
You can install a rearward facing 
child seat, unless there is a fault with 
the airbags (airbag warning lamp on).

Set the control to the 

"ON"

 position to activate the 

passenger's front airbag.
In this case, do not install a rearward facing child seat 
on this seat.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands