manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 261

259

Checks

DS5_en_Chap09_verifications_ed02-2015

Never store bottles of AdBlue

®

 in your 

vehicle.

Before topping-up, ensure that the vehicle is 
parked on a flat and level surface.
In wintry conditions, ensure that the 
temperature of the vehicle is above -11°C. 
Otherwise the AdBlue

®

 may be frozen and 

so cannot be poured into its tank. Park your 
vehicle in a warmer area for a few hours to 
allow the top-up to be carried out.

Procedure

F

  Press the START/STOP button to switch 

off the engine.

F

  Raise the boot floor for access to the 

AdBlue

®

 tank. Use an object, such as a 

bag, to keep the left part up.

Recommendations on storage

AdBlue

®

 freezes at about -11°C and 

deteriorates above 25°C. It is recommended 
that bottles be stored in a cool area and 
protected from direct sunlight.
Under these conditions, the additive can be 
kept for at least a year.
If the additive has frozen, it can be used once it 
has completely thawed out.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands