DS Automobiles DS 5 Handbook Download Page 159

Page: 159 / 376

157

Visibility

DS5_en_Chap05_visibilite_ed02-2015

Front - rear courtesy lamp

Front map reading lamps

Rear map reading lamps

Interior mood LEds

Courtesy lamps

In this position, the courtesy lamp
comes on gradually:

Front - rear courtesy lamps

Take care to avoid leaving anything in
contact with the courtesy lamps.

With the "permanent lighting" mode, the lighting
time varies according to the circumstances:
-

with the ignition off, approximately
ten minutes,

- in energy economy mode, approximately

thirty seconds,

- with the engine running, unlimited.

- when the vehicle is unlocked,
- when the electronic key is removed from

the reader,

- when opening a door,
- when the remote control locking button is

activated, in order to locate your vehicle.

It switches off gradually:
-  when the vehicle is locked,
-  when the ignition is switched on,
-  30 seconds after the last door is closed.

Permanently off.

Permanent lighting.

Front - rear map reading
lamps

With the ignition on, press the

corresponding switch.

Summary of Contents for DS 5

























































































































































































































































































































































































Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands

DS Automobiles DS 5, Handbook

Search results

Summary of Contents for DS 5

Reviews:

Brands by name

Popular brands