manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 66

OFF

OFF

DS5_en_Chap02_ouvertures_ed02-2015

Locking the vehicle 
with exterior perimeter 
monitoring only

Deactivate the interior volumetric and anti-lift 
monitoring to avoid unwanted triggering of the 
alarm in certain cases such as:
-  leaving a window partially open,
-  leaving a pet in the vehicle,
-  washing your vehicle,
-  changing a wheel,
-  having your vehicle towed,
-  transportation by sea.

deactivation of the interior 
volumetric and anti-tilt monitoring

F

  Switch of the ignition and within 

ten seconds, press this button 
until the indicator lamp is on 
continuously.

F

  Get out of the vehicle.

F

  Press the locking button on 

the remote control immediately 
or lock the vehicle using the 
Keyless Entry and Starting 
system.

The exterior perimeter monitoring alone is 
activated: the indicator lamp in the button 
flashes once per second.

Where the vehicle locks itself again 
automatically (occurs 30 seconds after 
unlocking, if a door or the boot is not 
opened), the monitoring system is not 
reactivated automatically.
To reactivate it, the vehicle must be 
unlocked and locked again, using the 
remote control or the "Keyless Entry 
and Starting" system.

To be effective, this deactivation must 
be carried out each time the ignition is 
switched off.

F

  Press the unlocking button on 

the remote control or unlock the 
vehicle using the Keyless Entry 
and Starting system.

deactivation

The alarm system is deactivated: the 
indicator lamp in the button goes off.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands