manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 81

79

Comfort

DS5_en_Chap03_confort_ed02-2015

These have one position for use (up) and a 
stowed position (down).
They can also be removed.
To remove a head restraint:

F

  release the backrest using control 

1

,

F

  tilt the backrest 

2

 slightly forwards,

F

  pull the head restraint upwards to the stop,

F

  then, press the lug 

A

.

Rear head restraints

Never drive with the head restraints 
removed; they must be in place and 
correctly adjusted.

F

  Remove the seat cushion 

1

 from its fixings 

by pulling upwards.

Removing the seat cushion

Refitting the seat cushion

F

  Position the seat cushion 

1

 vertically in its 

fixings.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands