manualshive.com logo in svg

DS Automobiles DS 5, Handbook

Share
Download
DS Automobiles DS 5 Handbook Download Page 198

DS5_en_Chap08_info-pratiques_ed02-2015

This kit is installed in the storage box, under the 
boot floor.

This kit consists of a compressor and a sealant 
cartridge.

It allows the 

temporary repair

 of a tyre.

You are then able to go to the nearest garage.
It is designed to repair most punctures which 
could affect the tyre, located on the tyre tread 
or shoulder.
Its compressor can be used to check and 
adjust the pressure of the tyre.

Temporary puncture repair kit

Access to the kit

List of tools*

All of these tools are specific to your vehicle 

and can vary according to equipment.
Do not use them for other purposes.

1.

  12 V compressor.

 

Contains a sealant cartridge for the 
temporary repair of a tyre and can also be 
used for adjusting tyre pressures.

2.

  Chock.

 

For blocking the wheels of the vehicle.

3.

  Wheel bolt cap removal tool.

 

For removing the wheel bolt head 
protectors on alloy wheels.

4.

  Wheel finisher remover.

 

For removing the wheel finishers on alloy 
wheels.

5.

  Removable towing eye.

* Depending on country of sale.

For more information on towing the vehicle, 
refer to the corresponding section.

Summary of Contents for DS 5

























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands